Product Experts Available 1-800-853-6360

CHEVY TRUCKS OILS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (3)
  2. (2)
  3. (1)
  4. (11)
  5. (12)
PRICE RANGE
  1. (4)
  2. (8)
  3. (7)
  4. (4)
  5. (6)
 
Items 1 to 24 of 29 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
No Mess Funnel Part # 61-355802-1
Patented Design Prevents Over Spills One Handed Operation Calibrated For Six 1-Ounce Increments Ideal For Filling All Fluids, Even In Tight Spots Everyone has those memories of using a funnel to help consume your favorite beer in the quickest but messiest way possible. Beer washes off easily… car fluids not so much. For the restorer whose worst nightmare is ruining a $15,000 engine with one slip of the funnel, Eckler’s has the product for you. This is more than a funnel with a fancy name (although it is one heck of a name) this is a patented design you can’t find in stores to ensure your clothes will remain mess free. The stopper at the bottom here is the key, as it blocks the fluid while suspended. However when you’re ready to insert the fluid simply pop the tube in, which releases the stopper and let it flow. As soon as you lift back up it seals back again leaving engine bay in pristine condition, or at least as good as it was when you started. Here at Eckler’s we won’t even judge you if you want to buy a second one for your beer consumption, you can trust us. Learn More

: $7.99 ea.

Sale Price: $4.46 ea.

Champion Classic & Muscle High Zinc Synthetic Blend Motor Oil, 10W-30 Part # 61-376744-1
Motor Oil Specifically Designed For The Protection Of Classic Car & Truck  Engines Specially Formulated For The Protection Of Pushrod, Flat Tappet & Roller Cam Engines Unsurpassed Film Strength & Viscosity Stability At High Temperatures Maintains Oil Pressure & Compression At High Temperatures Universal Compatibility With Other Petroleum & Synthetic Oils Top Choice For Engine Storage It's a proven fact... Modern motor oils no longer provide the anti-wear components zinc and phosphorous in sufficent amounts to protect your classic or numbers matching engine. Test after test has shown cam lobes can be severely affected (flattened) in just a couple of hundred miles with a regular motor oil. Champion Classic & Muscle Motor Oil has the answer with this specially foritfied motor oil specifically for classic engines. Don't take a chance with that newly rebuilt classic engine. Protect it with Champion Motor Oil. Learn More
$10.99 ea.
Champion Classic & Muscle High Zinc Synthetic Blend Motor Oil, 20W-50 Part # 61-376789-1
Motor Oil Specifically Designed For The Protection Of Classic Car & Truck  Engines Specially Formulated For The Protection Of Pushrod, Flat Tappet & Roller Cam Engines Unsurpassed Film Strength & Viscosity Stability At High Temperatures Maintains Oil Pressure & Compression At High Temperatures Universal Compatibility With Other Petroleum & Synthetic Oils Top Choice For Engine Storage It's a proven fact... Modern motor oils no longer provide the anti-wear components zinc and phosphorous in sufficent amounts to protect your classic or numbers matching engine. Test after test has shown cam lobes can be severely affected (flattened) in just a couple of hundred miles with a regular motor oil. Champion Classic & Muscle Motor Oil has the answer with this specially foritfied motor oil specifically for classic engines. Don't take a chance with that newly rebuilt classic engine. Protect it with Champion Motor Oil. Learn More
$10.99 ea.
Champion Classic & Muscle High Zinc Full Synthetic Motor Oil, 15W-50 Part # 61-376790-1
Motor Oil Specifically Designed For The Protection Of Classic Car & Truck  Engines Specially Formulated For The Protection Of Pushrod, Flat Tappet & Roller Cam Engines Unsurpassed Film Strength & Viscosity Stability At High Temperatures Maintains Oil Pressure & Compression At High Temperatures Universal Compatibility With Other Petroleum & Synthetic Oils Top Choice For Engine Storage It's a proven fact... Modern motor oils no longer provide the anti-wear components zinc and phosphorous in sufficent amounts to protect your classic or numbers matching engine. Test after test has shown cam lobes can be severely affected (flattened) in just a couple of hundred miles with a regular motor oil. Champion Classic & Muscle Motor Oil has the answer with this specially foritfied motor oil specifically for classic engines. Don't take a chance with that newly rebuilt classic engine. Protect it with Champion Motor Oil. Learn More
$13.99 ea.
Vintage Car High Zinc Motor Oil, 10W-40, 1 Quart Part # 61-391374-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More
$13.99 ea.
Vintage Car High Zinc Motor Oil, 10W-40, 6 Quart Case Part # 61-391385-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More

: $65.99 CS

Sale Price: $59.88 CS

Vintage Car High Zinc Motor Oil, 20W-50, 6 Quart Case Part # 61-391386-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More

: $65.99 CS

Sale Price: $59.88 CS

Vintage Car High Zinc Motor Oil, 20W-50, 1 Quart Part # 61-391387-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More
$12.99 ea.
Vintage Car High Zinc Motor Oil, SAE30, 1 Quart Part # 61-391408-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More
$12.99 ea.
Vintage Car High Zinc Motor Oil, SAE30, 6 Quart Case Part # 61-391409-1
2000 PPM Zinc For Maximum Camshaft Protection  Formulated With  A Unique Blend Of Conventional Base Oils And Performance Additives Enhanced Detergent And Dispersant Levels Reduces Sludge Buildup  Left Behind  From Years Of Using Inferior Oils  Viscosity Matches That Which Vintage Engines Were Designed To Expect Not For Vehicles With Catalytic Converters   The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come. Learn More

: $65.99 CS

Sale Price: $59.88 CS

Evans NPG Waterless Coolant 1/2 Gallon EC10064 Part # 61-395616-1
Boiling Point: Above 375° Antifreeze Properties: Protects below -40°F Benefits: Reduces system pressure, prevents overheating, maximizes BHP, provides unbeatable protection against corrosion and electrolysis Life Span: Protects for the life of the engine       Evans specialty NPG high performance waterless coolant, EC10064, is specifically designed for racing venues that allow propylene glycol based coolants, but not ethylene glycol and food service equipment where ethylene glycol products are contraindicated. Evans waterless coolants have a boiling point above 375 degree and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. Eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans NPG is the original waterless coolant and is a lifetime coolant. NPG is recommended for racing engines that run on Tracks or in series where there is a "no ethylene glycol" rule, and can be used in high performance street vehicles with high flow cooling systems. NPG is not recommended for daily drivers or cold weather operation, and may require system modifications to ensure a successful conversion. Evans prep fluid should be used to ensure All residual water is removed from the system before adding Evans waterless coolant.   HOW IT WORKSWater is an excellent fluid for cooling as long as it remains in a liquid state, but when water turns to steam it has virtually no capacity for heat transfer. Evans waterless coolant is a superior fluid for transferring heat in engines because it remains in a liquid state until above 375°F—well above the operating temperature of an engine.Within an engine cooling system, the hottest surfaces are those adjacent to the combustion chamber, specifically the cylinder liners and cylinder head. These hot spots cause water to vaporize, preventing efficient cooling and causing loss of performance and unnecessary engine damage. When the coolant fails in this way the engine becomes even hotter, causing more hot spots and more steam.Evans waterless coolants will not boil around these engine hotspots, maintaining efficient cooling performance even when the engine is put under extreme conditions. When water turns to steam it pressurizes the cooling system, putting stress on hoses and other components. The significantly higher boiling point of Evans coolants means significantly less pressure than water, resulting in a less stressed cooling system.Water contains oxygen, which causes corrosion and also allows electrolytic activity which further damages engine metals. Evans waterless coolants eliminate corrosion and electrolytic activity, significantly increasing the life of the engine. Learn More

: $27.99 ea.

Sale Price: $25.88 ea.

Evans Waterless Coolant Prep Fluid 1 Gallon, EC42001 Part # 61-395878-1
Evans Prep Fluid is ready to use—no water required Hygroscopically absorbs water Ensures all residual water is removed from the system Ensures that Evans coolants will meet the water content limits and provide peak performance Protects cooling system metals during flush 1 Gallon    vans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. For use with all engines being converted to any Evans waterless coolant, after draining 50-50 coolant from the cooling system. Learn More

: $32.99 ea.

Sale Price: $29.88 ea.

Evans Waterless Coolant Prep Fluid 1/2 Gallon, EC42064 Part # 61-395883-1
Evans Prep Fluid is ready to use—no water required Hygroscopically absorbs water Ensures all residual water is removed from the system Ensures that Evans coolants will meet the water content limits and provide peak performance Protects cooling system metals during flush 1/2 Gallon    vans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. For use with all engines being converted to any Evans waterless coolant, after draining 50-50 coolant from the cooling system. Learn More

: $22.99 ea.

Sale Price: $14.46 ea.

Evans High Performance Waterless Coolant, 1 Gallon, EC53001 Part # 61-395879-1
Boiling Point: Above 375° Antifreeze Properties: Protects below -40°F Benefits: Eliminates corrosion and pump cavitation, reduces system pressure, prevents overheating, maximizes BHP Life Span: Protects for life of the engine 1 Gallon     Evans High Performance waterless coolant is designed for all gasoline and light duty diesel engines. Evans coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life. You love your vehicle—it deserves Evans. Evans High Performance coolant is ready to use—no water required. It contains no silicates or phosphates and requires no Supplemental Coolant Additive (SCA). HOW IT WORKSWater is an excellent fluid for cooling as long as it remains in a liquid state, but when water turns to steam it has virtually no capacity for heat transfer. Evans waterless coolant is a superior fluid for transferring heat in engines because it remains in a liquid state until above 375°F—well above the operating temperature of an engine.Within an engine cooling system, the hottest surfaces are those adjacent to the combustion chamber, specifically the cylinder liners and cylinder head. These hot spots cause water to vaporize, preventing efficient cooling and causing loss of performance and unnecessary engine damage. When the coolant fails in this way the engine becomes even hotter, causing more hot spots and more steam.Evans waterless coolants will not boil around these engine hotspots, maintaining efficient cooling performance even when the engine is put under extreme conditions. When water turns to steam it pressurizes the cooling system, putting stress on hoses and other components. The significantly higher boiling point of Evans coolants means significantly less pressure than water, resulting in a less stressed cooling system.Water contains oxygen, which causes corrosion and also allows electrolytic activity which further damages engine metals. Evans waterless coolants eliminate corrosion and electrolytic activity, significantly increasing the life of the engine. Learn More

: $46.99 ea.

Sale Price: $42.88 ea.

EVANS Analog Refractometer E2196 Part # 61-396169-1
Fast, simple optical method Requires only 1 drop of coolant Compare optical reading to water content chart Handheld Portable     Pre-calibrated for accuracy, this Evans Cooling Refractometer is designed to accurately test for residual water content. By determining the water content you'll be able to safely set up your cooling system with Evans Cooling products. Learn More

: $28.99 ea.

Sale Price: $26.88 ea.

Edelbrock 1070 Sae 30 Break In Oil (Single Quart) Part # 61-396202-1
SAE 30 Break in Oil (Single Quart) A unique blend of hydro-processed petroleum base stocks and additives is ideal for preparing metal surfaces in new and rebuilt engines. The high zinc content ensures proper separation of all critical mating surfaces, giving camshafts and valvetrain components a protective layer of hydrodynamic film during the crucial break-in process. The first startup of any engine is critical to its performance; this formula provides the correct amount of cleaning agents vital to newly machined parts. Learn More
$9.99 ea.
Edelbrock 1080 Sae 30 Break In Oil (Case Of 12) Part # 61-396207-1
SAE 30 Break in Oil (Case of 12) A unique blend of hydro-processed petroleum base stocks and additives is ideal for preparing metal surfaces in new and rebuilt engines. The high zinc content ensures proper separation of all critical mating surfaces, giving camshafts and valvetrain components a protective layer of hydrodynamic film during the crucial break-in process. The first startup of any engine is critical to its performance; this formula provides the correct amount of cleaning agents vital to newly machined parts. Learn More
$121.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Bronze Satin 4oz Part # 61-396581-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 4oz Can (enough to do small jobs such as muffler tips, etc..)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$79.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Bronze Satin 8oz Part # 61-396918-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 8oz Can  "Most Popular"  (enough to do a set of long tube headers)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$149.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Midnight Black 4oz Part # 61-396919-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 4oz Can (enough to do small jobs such as muffler tips, etc..)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$79.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Midnight Black 8oz Part # 61-396920-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 8oz Can "Most Popular"  (enough to do a full set of long tube headers.)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$149.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Cast 16oz Part # 61-396921-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 16oz Can (enough to do full size headers, manifold, &   small jobs such as muffler tips, etc..)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$299.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Bronze Satin 16oz Part # 61-396923-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 16oz Can (enough to do full size headers, manifold, &   small jobs such as muffler tips, etc..)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$299.99 ea.
ZYBAR Hi Temperature / Hi Performance Manifold & Exhaust Coating Bronze Satin 32oz Part # 61-396924-1
Creates A BARRIER To High Temps (over 2,000 degrees F)  Reduces Radiant Heat Over 90% INCREASES HORSEPOWER Significantly Outperforms Wraps, Tapes, & Shields    Corrosion Resistant Simple To Apply: Just Spray, Wipe Or Dip Extremely Lightweight - .001 Inch Thickness Ideal Heat Control For Engine Parts, Manifolds, Headers, Tailpipes, Mufflers, & Tips 32oz Can (enough to do full size headers, manifold, &   small jobs such as muffler tips, etc..)   INSTALLATION IN ONLY  A FEW, EASY STEPS- MEDIA BLAST PART SURFACES & WIPE CLEANTHOROUGHLY STIR-MIX COATINGAIR-SPRAY, WIPE OR DIP A SINGLE, EVEN COATOVEN CURE AT 450ºF FOR TWO HOURS...OR AIR CURE FOR  A FULL 120 HOURS ZyBar® is the newest product in a full line of underhood and under car thermal insulating coatings for the automotive aftermarket.It is distributed exclusively by HushMat®, rated #1 for in-car heat  and noise reduction.ZyBar is a natural extension of industry-proven, auto enthusiastpreferred products sold by HushMat. It’s also the first-ever durable and effective thermal protection solution that outperforms tapes, wraps, shields, and ceramic-based paints. Learn More
$499.99 ea.
Items 1 to 24 of 29 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List