Product Experts Available 1-800-853-6360

Filter Your Result

  1. Remove This Item Category: Fuel Systems
CATEGORY
  1. Carburetor Cables and Linkage (17)
  2. Carburetor Rebuild Kits (2)
  3. Carburetors (437)
  4. Chokes, Cables and Rods (5)
  5. Fuel Filters and Strainers (9)
  6. Fuel Gauges and Related (8)
  7. Fuel Injectors (26)
  8. Fuel Lines and Hoses (337)
  9. Fuel Pumps and Related (63)
  10. Fuel Regulators (1)
  11. Fuel Sensors (3)
  12. Fuel System Hardware (6)
  13. Gas Caps (17)
  14. Gas Pedals and Pads (12)
  15. Gas Tank Filler Neck Hardware and Related (42)
  16. Gas Tanks (135)
  17. Intake Manifold and Related (15)
  18. Throttle Bodies (26)
BRAND
  1. (1)
  2. (5)
  3. (3)
  4. (39)
  5. (11)
  6. (476)
  7. (1)
  8. (21)
  9. (305)
  10. (3)
PRICE RANGE
  1. (234)
  2. (199)
  3. (340)
  4. (194)
  5. (151)
  6. (7)
 

1993 CHEVY TRUCK GAS PEDALS AND PADS

Search Term: 'All Parts'
Category: 'Gas Pedals and Pads'
Vehicle: '1993 TRUCK'
Items 1 to 24 of 1125 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List 
Chevy Truck Gas Tank Sending Unit Screw Kit, 1955-1966 Part # 61-172506-1
Reproduction Of Original This Chevy Truck reproduction gas tank sending unit screw kit has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and finish will work superbly for your restoration. In addition, using a reproduction gas tank sending unit screw kit from Eckler's will add authenticity and value to your Chevy. Learn More
$3.99 Kit
Chevy Truck Gas Tank Anti-Squeak Set, 1947-1987 Part # 61-261181-1
Upgrade Over Original 5-Piece Set Cut To Length Needed Reduces Metal To Metal Noise Ecklers Classic Trucks is proud to offer these high quality 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 197 truck fuel straps. Each strap is made from galvanized steel for maximum corrosion resistance, properly bent to factory specifications and feature double bent ends for added strength. Using old rusty and over stretched 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 truck fuel tank straps is not only an eyesore, but prone to failure. Ecklers Classic Trucks to get your Chevy or GMC truck on the road the right way. Learn More
$37.99 Set
Chevy Truck Gas Tank Hose Kit, Side Fill, For Under Bed Tanks, 24", 1947-1972 Part # 61-245541-1
For Under Bed Tanks Only Flat Design Aircraft Grade Clamps 24" 1-1/2" Hose & Clamps  Your hose clamps for your fuel tank wear down over time which could cause tank to become loose and rattily in your 1947-1972 Chevy Truck. Replace your worn in hoses and clamps today with an Eckler's Classic Chevy Truck Gas Tank Hose Kit. This hose and clamp kit connects the under bed aluminum tank to fender area for your side filler neck. Learn More

: $29.99 Kit

Sale Price: $25.46 Kit

Chevy Truck Gas Tank Hose Kit, Bed Fill, For Under Bed Tanks, 1-1/2", 1947-1972 Part # 61-245549-1
For Under Bed Tanks Only Aircraft Grade Clamps 1-1/2" x 1-1/2" Hose & Clamps This hose and clamp kit connects the under bed aluminum tank to the gas cap.Gas caps for under bed tanks are available in polished (P/N 129022) or anodized in various colors (P/N 129023), and the bed trap door kit (P/N 129020)to finish off your install. Learn More
$13.99 Kit
Fuel Tank Repair Kit Part # 61-335392-1
Will Work On All Types Of Metals and Most Fiberglass Five Piece Kit Re-Usable For Multiple Projects Bill Hirsch has been supplying sealer worldwide since 1965. Kit seal holes and seams better than any other sealer. It has greater strength and at the same time has the flexibility that a product of this type is required to have something other sealer do not have. It is a non porous coating and is not affected by alcohol, ethanol, or fuel additives. It will work on all types of metal and most fiberglass tanks where as some other sealers will not work on all metals or fiberglass tanks. Learn More
$68.99 Kit
FiTech Fuel Injection 600 HP Basic Kit, Bright Finish Part # 61-376713-1
KEY FEATURES & BENEFITS: Replaces Your Single 4 Barrel V-8 Carburetor With Precise Fuel Injection Technology Fits Factory & Aftermarket Single 4-Barrel V-8 Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology  Increases Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Idle Compensates For A/C (If Equipped) So No A/C Solenoid Is Required GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail    NOTES:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N 122276 SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Bright Tumble Polished Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore, Drilled For Quadrajet As Well Quadrajet Fitment:  Drilled For Quadrajet, Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Venturi Qty:  4 Injector Quantity:  4 Fuel Inlet Locations:  3 Timing Control:  Yes, Does Not Require CDI Box To Control Timing Max Flywheel Horsepower:  600 Supports Forced Induction & Nitrous:  No Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No Fuel Pump / System Included:  No, See Related Items Tab What's In The Box:  Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Manufacturer Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  11 lbs. Product Dimensions:  14 x 12 x 8 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$1,000.99 Kit
FiTech Fuel Injection 600 HP Basic Kit, Matte Black Part # 61-376706-1
KEY FEATURES & BENEFITS: Replaces Your Single V-8 4 Barrel Carburetor With Precise Fuel Injection Technology Works With Factory Or Aftermarket Single V-8 4-Barrel Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology  Increases Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Idle Compensates For A/C (If Equipped) So No A/C Solenoid Is Required GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail NOTES:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N  122276).  SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Matte Black Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore, Drilled For Quadrajet As Well Quadrajet Fitment:  Drilled For Quadrajet, Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Venturi Qty:  4 Injector Quantity:  4 Fuel Inlet Locations:  3 Timing Control:  Yes, Does Not Require CDI Box To Control Timing Max Flywheel Horsepower:  600 Supports Forced Induction & Nitrous:  No Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No Fuel Pump / System Included:  No, See Related Items Tab What's In The Box:  Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Manufacturer Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  11 lbs. Product Dimensions:  14 x 12 x 8 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours May Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$1,000.99 Kit
FiTech Fuel Injection 600 HP Power Adder Kit, Matte Black Finish Part # 61-376707-1
KEY FEATURES & BENEFITS: Supports Normally Aspirated, Supercharger/Turbocharger & Nitrous Up To 600 Flywheel Horsepower Fuel Tables Designed To  For Boost Up To 25 PSI & Nitrous, Retards Timing Under Boost / Nitrous Replaces Your Single 4 Barrel V-8 Carburetor With Precise Fuel Injection Technology Fits Factory Or Aftermarket Single 4-Barrel V-8 Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology  Improves Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Idle Compensates For A/C (If Equipped) So No A/C Solenoid Is Required GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail NOTES:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N  122276).  SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Matte Black Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore, Drilled For Quadrajet As Well Quadrajet Fitment:  Drilled For Quadrajet, Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Venturi Qty:  4 Injector Quantity:  4 Fuel Inlet Locations:  3 Timing Control:  Yes, Does Not Require CDI Box To Control Timing, Retards Timing Under Boost or Nitrous Max Flywheel Horsepower:  600 Supports Forced Induction & Nitrous:  Yes Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No Fuel Pump / System Included:  No, See Related Items Tab What's In The Box:  Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Manufacturer Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  11 lbs. Product Dimensions:  14 x 12 x 8 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$1,200.99 Kit
FiTech Fuel Injection 400 HP Basic Kit, Satin Part # 61-376725-1
KEY FEATURES & BENEFITS: Replaces Your Single 4 Barrel Carburetor With Precise Fuel Injection Technology Works With Factory Or Aftermarket Single 4-Barrel Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology Improves Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Idle Compensates For A/C (If Equipped) So No A/C Solenoid Is Required GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail    NOTES:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N  122276).SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Bright Tumble Polished Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore, Drilled For Quadrajet As Well Quadrajet Fitment:  Drilled For Quadrajet, Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Venturi Qty:  4 Injector Quantity:  4 Fuel Inlet Locations:  3 Timing Control:  No Max Flywheel Horsepower:  400 Supports Forced Induction & Nitrous:  No Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No Fuel Pump / System Included:  No What's In The Box:  Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Manufacturer Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  11 lbs. Product Dimensions:  14 x 12 x 8 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$858.99 Kit
FiTech MeanStreet Fuel Injection 800 HP Kit, Matte Black Part # 61-376742-1
KEY FEATURES & BENEFITS: Replaces Your Single 4 Barrel Carburetor With Precise Fuel Injection Technology 8 Fuel Injector Version Supports Up  To 800 Flywheel Normally Aspirated Horsepower  Fits  Factory Or Aftermarket Single 4-Barrel Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Wet Flow "Swirl" Fuel Technology Improves Performance Over Other Designs Self Tunes In Minutes With No Laptop Tuning Required Voltage Fuel Pump Control Reduces Fuel Pump Heat & Extends Life Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors GM Style Sensors Can Be Replaced Locally At Most Auto Parts Stores Integrated OBD-II Style Diagnostics, Limp Home Mode Allows You To Drive Should A Sensor Fail    Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center  - P/N  25-376727-1 Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N 25-122276-1 SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Matte Black Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore, Drilled For Quadrajet As Well Quadrajet Fitment:  Drilled For Quadrajet, Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Venturi Qty:  4 Injector Quantity:    8 Fuel Inlet Locations:  3 Timing Control:  Yes Max Flywheel Horsepower:  800 Supports Forced Induction & Nitrous:  No Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:    Yes Fuel Pump / System Included:  No What's In The Box:  Throttle body, Fuel Rails w/-06AN Fuel Inlet Fitting, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen 8 GB Memory Controller w/Windshield Mount, Plug N Play Wiring Harness, Bosch 4.2 Wide Band 02 Sensor & Clamp On 02 Bung Kit, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, A/C Kickup Control Kit, Gasket Kit, Step By Step Instructions  Where It's Made: China Manufacturer Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  11 lbs. Product Dimensions:  14 x 12 x 8 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$1,100.99 Kit
Chevy Truck Gasket Set, Intake Manifold, 283/327/350Ci, 1957-1981 Part # 61-291766-1
Replacement Includes Two Sides,Front And Rear Seal And Distributor Gasket Learn More
$24.99 Set
Chevy Truck Gasket Set, Timing Chain Cover, Small Block, 1955-1992 Part # 61-291775-1
Replacement Includes: Timing Cover Gasket, Balancer Seal, Water Pump Gaskets & Oil Pan To Timing Cover Seals Learn More
$14.99 Set
Chevy Truck Gasket Set, Timing Chain Cover, Big Block, 1966-1974 Part # 61-291777-1
Replacement Includes: Timing Cover Gasket, Balancer Seal, Water Pump Gaskets & Oil Pan To Timing Cover Seals Learn More
$17.99 Set
1947-54 Chevy Truck Filler Kit Gas Tank Part # 61-301504-1
Reproduction of Original This Chevy truck gas tank filler kit is just the ticket to replace your rusty original. Original gas tank fillers very often have severe internal rust that clogs fuel systems, no matter how many times you try to clean or seal it. Some gas tank fillers even have rust holes that leak fuel, even when patched, causing an unsafe condition for you and your classic. Solve your fuel system troubles today with a new Chevy truck gas tank filler kit from Ecklers Classic Trucks! 1947-1954 Chevy PU Learn More
$60.99 Kit
Holley Sniper 650HP EFI Kit with Black Ceramic Finish Part # 61-384357-1
KEY FEATURES & BENEFITS: Replaces Your Single V8 4-Barrel Carburetor With Precise Fuel Injection Technology Works With Factory Or Aftermarket Single V8 4-Barrel Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Flooding, Hesitations, Vapor Lock, & Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Throttle Body Mounted ECU - No Extra Boxes To Mount 4-Wire Vehicle Connection (Battery +, Bettery -, Switched Ignition, & RPM) Self Tuning ECU Means You Don't Have To Be A Computer/Tuning Wiz To Have EFI Includes Widebad Oxygen Sensor For Real-Time Fuel Map Learn Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Integrated Fuel Pressure Regulator, Ignition Timing Control & Coil Driver Black Ceramic Finish Disipates Heat And Looks Tough Notes:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center  25-376727 (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N  122276).  Requires At Least 58 PSI and 67 GPH To Properly Function. SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Black Ceramic Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore Quadrajet Fitment:  Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Height, Base To Air Cleaner Mounting Surface:  3.75" Venturi Qty:  4 CFM Rating:  800 Throttle Bore:  1.6875" Injector Quantity:  4 Timing Control:  Requires Distributor That Can Lock Out The Timing & Works With MSD 6AL Boxes. Horsepower Range:  250 to 650 Supports Forced Induction & Nitrous:    Yes,  Supports Up To 25PSI, 2.5 Bar MAP Sensor Is Built In  Idle Up Feature:  Yes, IAC Sensor Can Adjust For Cars That Have A/C and Larger Aftermarket Cams Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No.  Color Touchscreen Is Included For Setup & Gauge Views.  Calibration Wizard Self Allows Easy Setting Of Base Map, Then Computer Self-Tunes In Real Time. Fan Control:  Yes  Linkage & Kickdowns:  Accepts Same Linkage & Kickdowns As Used On Most Carburetors Transmission Control Support:  No, Will Not Control Electronically Controlled Transmissions Or Torque Converters Fuel Pump / System Included:  No.  Compatible With FiTech Fuel Command Center P/N 376727:  Yes What's In The Box:  Throttle body, Fuel Rails, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller, Plug N Play Wiring Harness, Bosch 4.9 Wide Band 02 Sensor, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Where It's Made:  USA Manufacturer Limited Warranty:  90-Day Product Weight:  9 lbs. Product Dimensions:    11" x  8" x  9" Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$999.99 Kit
Holley Sniper EFI Conversion Kit, 650HP, Shiny Part # 61-384418-1
KEY FEATURES & BENEFITS: Replaces Your Single V-8 4 Barrel Carburetor With Precise Fuel Injection Technology Works With Factory Or Aftermarket Single V-8 4-Barrel Intake Manifolds & Air Cleaner Assemblies Eliminates Hard Starting, Sputtering, Cold Start Warmups,  Flooding, Hesitations, Vapor Lock, & Interior Fuel Smell  Instant Starting & Throttle Response  (Even After Long Term Storage), Improves Mileage, Superior All-Climate Drivability Throttle Body Mounted ECU - No Extra Boxes To Mount 4 Wire Vehicle Connection (Battery +, Bettery -, Switched Ignition, & RPM) Self Tuning ECU Means You Don't Have To Be A Computer/Tuning Siz To Have EFI Includes Widebad Oxygen Sensor For Realtime Fuel Map Learn Uses Same Throttle & Transmission Linkage As 4150 Holley Carburetors Integrated Fuel Pressure Regulator, Ignition Timing Control & Coil Driver Shiny Looks Great, Is Durable, and Easy To Clean Notes:  Requires Separate Fuel System Purchase, NOT Included - See Fuel Command Center Under Related Items (All The Benefits Of An In-Tank Fuel Pump Without Modifying Your Fuel Tank!).  Pre-Drilled To Fit Quadrajet Intake Manifolds (Requires Separate Quadrajet Intake Manifold Adapter Plate Purchase - P/N  122276).  Requires At Least 58 PSI and 67 GPH To Properly Function SPECIFICATIONS: Quality Level:  High Performance Upgrade Throttle Body Construction:  Die Cast Aluminum Color: Shiny Metering Style:  Speed Density Throttle Body Mounting Flange:  4-Barrel Square Bore Quadrajet Fitment:  Requires Separate Quadrajet Adapter Plate Purchase - P/N 122276 Height, Base To Air Cleaner Mounting Surface:  3.75" Venturi Qty:  4 CFM Rating:  800 Throttle Bore:  1.6875" Injector Quantity:  4 Timing Control:  Requires Distributor That Can Lock Out The Timing & Works With MSD 6AL Boxes. Horsepower Range:  250 to 650 Supports Forced Induction & Nitrous:    Yes,  Supports Up To 25PSI, 2.5 Bar MAP Sensor Is Built In  Idle Up Feature:  Yes, IAC Sensor Can Adjust For Cars That Have A/C and Larger Aftermarket Cams Self Tuning:  Yes, In Minutes...Just Answer A Few Questions On Touch Screen Display Laptop Tuning:  No.  Color Touchscreen Is Included For Setup & Gauge Views.  Calibration Wizard Self Allows Easy Setting Of Base Map, Then Computer Self-Tunes In Real Time. Fan Control:  Yes  Linkage & Kickdowns:  Accepts Same Linkage & Kickdowns As Used On Most Carburetors Transmission Control Support:  No, Will Not Control Electronically Controlled Transmissions Or Torque Converters Fuel Pump / System Included:  No.  Compatible With FiTech Fuel Command Center P/N 376727:  Yes What's In The Box:  Throttle body, Fuel Rails, Fuel Injectors, ECM With Calibration Module, Handheld Touch Screen Controller, Plug N Play Wiring Harness, Bosch 4.9 Wide Band 02 Sensor, Fuel Pressure Regulator, GM Type 2.5 BAR MAP Sensor, GM Type TPS Sensor, GM Type IAC Motor, GM Type Coolant Temperature Sensor, GM Type Adjustable Control Fan Switch, Gasket Kit, Step By Step Instructions  Where It's Made:  USA Manufacturer Limited Warranty:  90-Day Product Weight:  9 lbs. Product Dimensions:    11 x  8 x  9 Approx. Installation Time:    6-8 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No Learn More
$999.99 Kit
Holley Sniper 30 Amp Fuel Pump Relay Kit Part # 61-384619-1
KEY FEATURES & BENEFITS: Can Be Use With Any Electric Fuel Pump, As Long As The Current Load Is Not Above 30 Amps Will Work With 12, 16, and 24 Volt Electrical Systems And Comes Equipped With 12 AWG Wires That Provide Extra Current-Carrying Capacity With Minimal Voltage Loss 30 Amp Relay Is Included With A Relay Socket Wired With Long Leads Specifically Designed To Reduce The Number Of Splices Required Quality Insulated Crimp Connectors Are Provided To Make The Necessary Splices (Where Required) Detailed Instructions Are Included Made In The USA  SPECIFICATIONS: Quality Level:  High Performance Upgrade    What's In The Box:    Fuel Pump Relay,  12 Gauge Wire, Crimp Connectors, Fuses, and  Installation Instructions Where It's Made:  USA Manufacturer Limited Warranty:  90-Day Product Weight:  1.23lbs. Product Dimensions:    5.5" x 3" x 5.25"  Approx. Installation Time:      1-2 Hours, Experienced Mechanic Times Quoted, Yours May Take Longer Installation Difficulty:    Difficult, Seek Professional Installation Learn More
$111.99 Kit
FiTech Inline Frame Mount Fuel Delivery Kit, 255LPH Part # 61-385126-1
KEY FEATURES & BENEFITS: Use This Kit With Any Aftermarket EFI Conversion Kit That Supports 600-625HP  Kit Includes A 255LPH Fuel Pump, Pre & Post Fuel Filters, Necessary Hose Ends, Billet Fuel Pump, Clamp & 25 Feet Of EFI Rated Hose Notes:  Mounts Your Fuel Pump Externally Along The Frame RailSPECIFICATIONS: Quality Level:  High Performance Upgrade Max Flywheel Horsepower:    625 Supports Forced Induction & Nitrous:    Yes Fuel Pump Size:  255LPH  Fuel Line Diameter:    3/8 Inch  Fuel Line Length:    20 Feet  Fuel Pump Inlet / Outlet:  -8 AN Inlet & -6 AN Outlet What's In The Box:    255LPH Fuel Pump, Pre & Post Billet Aluminum Fuel Filters,  Push Lock  Hose Ends, Billet Fuel Pump, Clamp & 25 Feet Of EFI Rated Hose  Where It's Made: China Manufacturer Limited Warranty:  1-Year All Parts Product Weight:  9 lbs. Product Dimensions:    11 x 8 x 12  Approx. Installation Time:      2-3 Hours, Experienced Mechanic Times Quoted, Yours Will Take Longer Installation Difficulty:    Difficult, Seek Professional Installation 50-State Emission Legal:  No This kit features a 255 L/PH external inline fuel pump capable of handling up to 600 HP. Select this option for your fuel delivery system and you will have a 255 L/PH inline high pressure, high volume EFI pump that will provide enough fuel delivery for up to 600 HP. Kit also includes fuel lines, fittings and two billet fuel filters and enough premium quality hose for an inlet and return line. The filters include a 100 micron pre-filter and a 30 micron post filter. Note that when using this pump a return line to the fuel tank is required. Learn More
$245.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP w/o Trans. Control | FiTech - 70001 Part # 61-389090-1
The Fastest AND Easiest Way  To Get Your New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 500 HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control (See P/N 389119) SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:  No (Available With Different Model - 70002) Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70003 750HP w/o Trans. Control or 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,614.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP With Trans. Control | FiTech - 70002 Part # 61-389119-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Built-In Transmission Control For GM 4L60, 4L65, 4L70, or 4L80 Automatic Transmissions Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Up To 500HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:    Included, Works With 4L60, 4L65, 4L70, or 4L80 G.M. Transmissions Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount, Installation Instructions Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP w/o Trans. Control | FiTech - 70003 Part # 61-389120-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP (Including Supercharged, Turbocharged, & Nitrous) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP With Trans. Control | FiTech - 70004 Part # 61-389121-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP  (including Supercharged, Turbocharged, & Nitrous) Includes Transmission Control For 4L60, 4L65, 4L70, or 4L80 G.M. transmissions NOTE:  MUST Use Factory Coil Pack Sub-Harness.  SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On),  3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$2,154.99 Kit
Items 1 to 24 of 1125 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Grid  List